ENWW Using the Embedded Web Server 118
IPX/SPX
The IPX/SPX tab allows you to configure IPX/SPX (Internet
Packet Exchange/Sequenced Packet Exchange) parameters on the
HP Jetdirect print server for operation on a Novell NetWare or
IPX/SPX-compatible network (such as a Microsoft network).
See Table 4.5
for a description of items on this page.
CAUTION If you are using direct-mode printing over IPX/SPX
on a Microsoft network, do not disable IPX/SPX.
For a Novell NetWare network:
● The embedded Web server may be used to select Queue Server
Mode parameters in a Novell Directory Services (NDS)
environment.
● You cannot create the NDS print server, printer, and queue
objects using the embedded Web server. To create these objects,
use other available tools or utilities.
Table 4.5 IPX/SPX Settings (1 of 2)
Item Description
IPX/SPX Enable Enables or disables the IPX/SPX protocols on the HP Jetdirect
print server. If the checkbox is empty, IPX/SPX is disabled.
IPX/SPX Frame
Type
Specify the IPX/SPX frame type to be used by the HP Jetdirect
print server on your network. After a frame type has been
configured, all others will be counted and discarded.
● AUTO (default) senses all frame types and configures the first
one detected.
● EN_8023 limits the frame type to IPX over IEEE 802.3 frames.
● EN_II limits the frame type to IPX over Ethernet frames.
● EN_8022 limits the frame type to IPX over IEEE 802.2 with
IEEE 802.3 frames.
● EN_SNAP limits the frame type to IPX over SNAP with
IEEE 802.3 frames.
To Next Page
Loading...
Need help?
General
