HP Ew2400 - JetDirect Print Server

ENWW TCP/IP Configuration 84
Config Server (Read-only parameter) The IP address of the server (such
as a BOOTP or DHCP server) that last configured the IP
address on the HP Jetdirect print server.
TFTP Server (Read-only parameter) The IP address of the TFTP server
that provided TFTP parameters to the HP Jetdirect print
server.
TFTP Filename (Read-only parameter) The path and TFTP filename on the
TFTP server. For example,
hpnp/printer1.cfg
domain-name The domain name for the device. For example,
domain-name support.hp.com
assigns support.hp.com as the domain name.
The domain name does not include the host name; it is not
the Fully Qualified Domain Name (such as
printer1.support.hp.com).
pri-dns-svr IP address of the primary DNS (Domain Name System)
server.
sec-dns-svr IP address of a secondary DNS server to use if the primary
DNS server is unavailable.
pri-wins-svr The IP address of the primary Windows Internet Naming
Service (WINS) server, in dotted notation.
sec-wins-svr The IP address of the secondary Windows Internet Naming
Service (WINS) server, in dotted notation.
smtp-svr (SMTP Mail Server) The IP address of the outgoing e-mail
Simple Mail Transport Protocol (SMTP) server, for use with
supported Scan devices.
TCP/IP Print Options
Command Description
9100-printing Enables or disables printing to TCP port 9100 on the print
server. 0 disables, 1 (default) enables.
ftp-printing Enables or disables the ability to print through FTP. 0
disables, 1 (default) enables. (TCP ports 20, 21)
ipp-printing Enables or disables the ability to print using IPP. 0 disables,
1 (default) enables. (TCP port 631)
lpd-printing Enables or disables the ability to print using LPD. 0 disables,
1 (default) enables.(TCP port 515)
banner Enables or disables printing an LPD banner page. 0 disables
banner pages. 1 (default) enables banner pages.
Table 3.4 Telnet Commands and Parameters (6 of 18)