HP Ew2400 - JetDirect Print Server

ENWW TCP/IP Configuration 92
ipx-frametype Specifies the IPX frame type settings available for your print
server model: AUTO (default), EN_SNAP, EN_8022,
EN_8023, EN_II. For more information, see Chapter 9
.
ipx-sapinterval Specifies the time interval (1 to 3600 seconds) that the
HP Jetdirect print server waits between Service Advertising
Protocol (SAP) broadcasts on the network. The default is
60 seconds. 0 disables SAP broadcasts.
ipx-mode (Read-only parameter) Specifies the NetWare mode
configured on the print server, either RPRINTER or
QSERVER mode.
ipx-nds-tree An alphanumeric string, up to 31 characters, that specifies
the NDS tree name for the print server.
ipx-nds-context An alphanumeric string, up to 256 characters, that specifies
the NDS context for the HP Jetdirect print server.
ipx-job-poll Specifies the time interval (1 to 255 seconds) that the
HP Jetdirect print server will wait to check for print jobs in
a print queue. The default is 2 seconds.
pjl-banner
ipx-banner
Enables or disables printing an IPX banner page through
Printer Job Language (PJL). 0 disables banner pages. 1
(default) enables banner pages.
pjl-eoj
ipx-eoj
Enables or disables IPX end-of-job notification through PJL.
0 disables, 1 (default) enables.
pjl-toner-low
ipx-toner-low
Enables or disables IPX toner-low notification through PJL.
0 disables, 1 (default) enables.
AppleTalk
Command Description
appletalk Enables or disables AppleTalk (EtherTalk) protocol
operation on the print server. 0 disables, 1 (default) enables.
For example,
appletalk 0 will disable AppleTalk operation
name-override (External print servers only) Specifies the name of the
AppleTalk network. Up to 32 characters may be used.
Name (Read-only parameter) The name of the printer on the
AppleTalk network. A number after the name indicates that
there are multiple devices with this name, and this is the Nth
instance of the name.
Print Type (Read-only parameter) Specifies the AppleTalk network
printer type reported by the Jetdirect print server. Up to three
print types may be reported.
Zone (Read-only parameter) The name of the AppleTalk network
zone on which the printer is located.
Phase (Read-only parameter) AppleTalk phase 2 (P2) is
preconfigured on the HP Jetdirect print server.
Table 3.4 Telnet Commands and Parameters (14 of 18)