12
2.3 Connecting to Power
Use only the attached power adapter to activate the camcorder.
1.
Connect one end of power connector to mini USB port of the
camcorder. USB port input DC5V/1A.
2.
Plug the other end of car adapter to the cigarette lighter
socket of your vehicle. Once the vehicle engine is started, the
camcorder automatically turns on. Car adapter input DC
12/24V.
2.4 LED Indicator
Status LED Indicator
Power on, standby Red, solid
Recording Red, slow flashing
Emergency recording Red, rapid flashing
To Next Page
Loading...
