EasyManua.ls Logo

HP f490w - Parking Mode Activation

HP f490w
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
4.5 Parking Mode
To monitor the vehicle when it is parked, you can activate Parking
Mode.
Before you activate Parking Mode, it is required to install ACC
cable through professional car service shop.
1. Open Go Moto Plus
app.
2. Tap
i
con, “Stop Recording” will be heard, and you will
enter Menu Setting.
3. Set up Parking Mode 12 hours or 24 hours. After setting,
return to preview page.
4. When car’s engine is shut down, the camcorder will announce
“Start Timelapse Recording” and then enter parking mode.
When the collision is detected, the emergency recording will
be triggered.
5. When car’s engine again starts, the camcorder will disable
parking mode and resume normal loop recording.
Note:
1. ACC cable is not included in the package. Please ask for more information
from your distributor.
2. “Parking Mode” option will appear in Menu Setting only when ACC cable is
installed.
3. The video file taken in this mode is same as normal loop recording mode. It
will be saved in the “Video” folder. And the emergency file will be saved in the
“Emergency” folder. The file size is according to Record Interval setting.
4.Parking Mode is taking videos in Timelapse format. The camcorder is
continuously recording by one second one frame. For example, 30 minutes
recording will be saved in one minute.

Related product manuals