34
Note:
1. If tap “Remind me later”, the app notification will pop up every time when the
camcorder is connected.
2.When the smart phone’s Wi-Fi is occupied by the camcorder, iOS system will
auto switch to cellular data, and the network is still useable; but, Android
system won’t. Please attention the following notices to upgrade new
firmware.
(1) iPhone User: Because the smart phone’s Wi-Fi is connected with the
camcorder, iPhone will use cellular data to download the new firmware. If
you don’t want to use cellular data to download, cut off the smart phone’s
Wi-Fi connection with camcorder firstly, then connect with local area
network. Then, open the app once again and tap “Upgrade Now” to
download new firmware to smart phone.
(2) Android User: Because the smart phone’s Wi-Fi is connected with the
camcorder, Android phone has no network to download the file. Please cut
off smart phone’s Wi-Fi connection with the camcorder firstly, and connect
with local area network. Or, turn off the Wi-Fi, and use cellular data. Then,
open the app once again and tap “Upgrade Now” to download new
firmware to smart phone.
To Next Page
Loading...
