HP F650g - Powering the Camcorder On; Off

11
2.3 Connecting to Power
Use only the supplied car charger to power up the camcorder.
1. Connect one end of the car charger to the USB connector of the
camcorder. USB port input: DC 5V / 1A.
2. Plug the other end of the car charger to the cigarette lighter socket
of your vehicle. Once the vehicle engine is started, the camcorder
automatically powers on. Car charger input: DC 12 / 24V.
2.4 LED Indicator
Status Explanation
LED Indicator Color
Power off, connect
external power
Red
Power on, standby
Green
Recording/ Recording
and screen off
Flash red