HP F650g - Collision Detection

29
3.6 Collision Detection
If the Collision Detection function is enabled, this camcorder begins
emergency recording once it detects any collision. Sensitivity of the
Collision Detection function is set to Normal by default, if user wants to
change the settings of Collision Detection, do the following:
1. Press the button to enter the OSD menu.
2. Press the / button to select Collision Detection, and
then press the button for entering function menu.
3. Press the / button to change the sensitivity of this
camcorder’s collision detection (High Sensitivity / Normal
Sensitivity / Low Sensitivity / Off), and then press the
button for entering function menu.
4. Press the button return to recording screen.