20
3.4.1 Speed Cam Alert
If the Speed Cam Alert function is enabled, once your car’s location is
determined by GPS and approaches a speed cam, this product produces
audible alert and screen message.
To enable the Speed Cam Alert, do the following:
1. Press the button to enter the OSD menu.
2. Press the / button
to select Speed Cam Alert,
and then press the
button for entering function
menu.
3. Press the / button
to select On, and then press
the button to enable
the function.
4. Press the button to return recording screen.
5. The alarm screen turns red to remind you to slow down if you are
driving faster than the speed limit.
Note:
The speed cam alert function must have the speed cam datum from the country you use. The function
will be void if the product is used in any other countries. Please consult with the shop you purchased if
the function is void. There is no guarantee the speed cam datum will be included for the worldwide
countries.
To Next Page
Loading...
