HP f870x - Page 41

40
- To disable this function, in the vibration detection recording,
press any key to wake up the screen, and resume to normal loop
recording; or when the car engineer is started again, it will be
back to normal loop recording.
Note:
1. When Motion Detection or Vibration Detection triggers, the camcorder records
events taken by front camera only.
2. If battery in a fully charged condition and Wi-Fi is off, it can record about 30
minutes video in Motion Detection mode. As the camcorder is used, the battery
storage capacity will decrease gradually. This is a normal phenomenon for the
battery.
3. The video files taken in Motion Detection mode will be saved in normal recording
folder.
4. The video files taken in Vibration Detection mode will be saved in Event recording
folder, which will not be overwritten by normal video files.