45
Note:
1. Please measure front windshield viewing area, do not block the driver's forward field of vision,
and install the camcorder below rearview mirror (upper central of the front windshield). We
recommend that the sky and the ground occupied 50 % of the video screen, install the bracket then
adjust the camcorder to make the lane is aligned to the lane alignment icon. Correct installation
makes the camcorder to maximize the efficiency and improve the accuracy of LDWS.
2. Make sure that traffic lane align icon will not be obscured other things (e.g. hood). It may cause
misjudgment if the endpoint is obscured.
3.5.7 FCWS
Once your car’s location is determined by GPS and the
FCWS
function
is enabled, this camcorder produces audible alert and screen message
when you drive at speeds over 60 km/h (37 mph) and are less than 20 m
away from the car in front of you. If the camcorder not completes the
satellite positioning, and the leading vehicle distance below 20 meters, it
will also produce a warning screen and beep reminder.
To set the FCWS (Forward Collision Warning System), do the following:
1. Press the button to enter the OSD menu.
2. Press the / button to select FCWS, and then press the
button for entering function menu.
3. Press the / button to select On, and then press the
button to enable the function.
4. Press the button to return recording screen.
To Next Page
Loading...
