HP G6000 - Notebook PC Maintenance And Service Guide

Top cover
Description Spare part number
Top cover (includes TouchPad and TouchPad cable) 461872-001
Before removing the top cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 37).
5.
Remove the following components:
a.
Hard drive (see
Hard drive on page 40)
b.
Optical drive (see
Optical drive on page 48)
c.
Switch cover (see
Switch cover on page 50)
d.
Keyboard (see
Keyboard on page 52)
e.
Display assembly (see
Display assembly on page 56)
Remove the top cover:
1.
Turn the computer upside down, with the front toward you.
2.
Remove the nine Phillips PM2.5×8.0 screws that secure the top cover to the base enclosure.
Component replacement procedures 63

HP G6000 - Notebook PC Specifications

General

Brand	HP
Model	G6000 - Notebook PC
Category	Laptop
Language	English