HDD Troubleshooting Guide Page 20 of 48
Then the Comprehensive DST
starts automatically.
- If the hard disk drive has a
failure, the test stops and an
error message pops up.
NOTE: the user can stop the
test any time by pressing the
[ESC] = Cancel key.
If the hard disk drive is good,
the test finishes within 40 to
120 minutes.
Press any key to go back to the
starting menu.
Hewlett-Packard Setup Utility
File Storage Security Power Advance
<F1=Help>
Device Configuration
Storage Options
DPS Self-test
Storage
Boot Order
ESC=Cancel
Performing test 2 …
……………………………
40%
DPS Self-test
Hewlett-Packard Setup Utility
File Storage Security Power Advance
<F1=Help>
Device Configuration
Storage Options
DPS Self-test
Storage
Boot Order
Pres any key to continue
Test succeede
Completion Code: 0
Drive Information:
DPS Self-test
Size 40.0 GB
odel xxxxxxxxxx
Firmware 3.20
Serial Number ssssssss
Location SATA 0