EasyManuals Logo

HP J6039C - JetDirect 200M Print Server User Manual

HP J6039C - JetDirect 200M Print Server
181 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #163 background imageLoading...
Page #163 background image
16 HP Jetdirect Configuration Page ENWW
CONFIG FILE: The name of the HP Jetdirect configuration file. The file
pathname may be truncated to fit on two lines.
NOT SPECIFIED indicates that a file was not specified in
the BOOTP reply from the host.
DOMAIN NAME: The Domain Name System (DNS) name of the domain in
which the HP Jetdirect print server resides (for example,
support.company.com). It is not the fully qualified DNS
name (for example, printer1.support.company.com)
because the host printer name is not included.
NOT SPECIFIED indicates that a domain name has not
been configured on the print server.
DNS SERVER: The IP address of the Domain Name System (DNS) server.
NOT SPECIFIED indicates that a DNS servers IP address
has not been configured on the print server.
WINS SERVER: The IP address of the Windows Internet Name Service
(WINS) server.
NOT SPECIFIED indicates that a WINS server’s IP
address has not been configured on the print server.
SYSLOG SERVER: The IP address of the syslog server configured on the
print server.
NOT SPECIFIED indicates that a syslog server has not
been configured.
IDLE TIMEOUT: The timeout value expressed in seconds after which the
print server closes an idle TCP print data connection.
Acceptable values are integers between 0 and 3600. A
value of zero turns off the timeout mechanism. The default
value is 270 seconds.
SLP: Specifies whether the HP Jetdirect print server sends
Service Location Protocol (SLP) packets used by system
applications for automated installation.
ENABLED: The print server sends SLP packets.
DISABLED: The print server does not send SLP packets.
WEB JETADMIN URL: If the HP Jetdirect print server is found on the network by
HP Web JetAdmin, the URL of the host system used for
HP Web JetAdmin services is displayed. The URL is
limited to two lines and may be truncated.
NOT SPECIFIED indicates that the URL of the Web
JetAdmin host system could not be identified or is
not configured.
Table 9.6 TCP/IP Configuration Information (3 of 3)
Message Description

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP J6039C - JetDirect 200M Print Server and is the answer not in the manual?

HP J6039C - JetDirect 200M Print Server Specifications

General IconGeneral
BrandHP
ModelJ6039C - JetDirect 200M Print Server
CategoryPrint Server
LanguageEnglish

Related product manuals