ON and ONLINE?
The first step in troubleshooting your print server is to make sure that the attached printer is ready to
receive a print job from the print server. To do this, you check the printer's lights or control panel to see
whether it is ON and ONLINE.
If your printer's power is switched on and the printer is ready to print, click on the Yes button
below to return to the Troubleshooting Overview page and continue with the next step in the
troubleshooting procedure.
If the printer is not ready to print, or if you are not sure what to look for, click on the No
button below to start evaluating the printer.
To Next Page
Loading...
