HP J9661A - Rack Mounting the Switch

2-9
Installing the Switch
Installation Procedures
Rack Mounting the Switch
Note Requires optional mounting bracket kit (not included).
1. Use a #1 Phillips (cross-head) screwdriver and attach the mounting
brackets to the switch with the included 8-mm M4 screws.
Figure 2-3. Attaching mounting brackets to the V1410-16 Switch
Figure 2-4. Attaching mounting brackets to the V1410-24 and V1410-24-2G Switch
8 mm
M4 screws
8 mm
M4 screws