Index-2
I
included parts … 2-1
installation
connecting the switch to a power source … 2-13
horizontal surface mounting … 2-12
location considerations … 2-6
network cable requirements … 2-6
precautions … 2-4
rack or cabinet mounting … 2-9, 2-11
site preparation … 2-6
L
LEDs
behavior during self test … 2-8
descriptions of … 1-5
error indications … 4-2, 4-5
Fault
showing error conditions … 4-2
location on switch … 1-2
Power … 1-5
behavior during self test … 2-9
location for the switch, considerations … 2-6
M
MDI-X to MDI network cable … A-9, A-11
MDI-X to MDI-X network cable … A-10
mounting the switch
in a rack or cabinet … 2-9, 2-11
precautions … 2-4
on a horizontal surface … 2-12
N
network cables
HP Auto-MDIX feature … A-7
required types … 2-6
twisted-pair connector pin-outs … A-7
twisted-pair, wiring rules … A-7
network devices
connecting to the switch … 2-14–2-15
network ports
connecting to … 2-14–2-15
location on switch … 1-4
types of … 1-4
P
parts, included with the switch … 2-1
physical specifications, switch … A-1
pin-outs
twisted-pair cables … A-7
PoE LED patterns … 4-4
PoE troubleshooting … 4-4
port LEDs
normal operation … 2-9
ports
10/100BASE-TX, location on switch … 1-2–1-3
10/100Base-TX, location on switch … 1-2–1-3
connecting to … 2-14–2-15
HP Auto-MDIX feature … A-7
network connections … 2-14–2-15
power connector … 1-6
Power LED … 1-5
behavior during self test … 2-9
behaviors … 1-5
location on switch … 1-2
power source
connecting the switch to … 2-13
Power-over-Ethernet
PoE power … 1-4
precautions
mounting the switch … 2-4
power requirements … 2-4
preparing the installation site … 2-6
R
rack
mounting precautions … 2-4
mounting the switch in … 2-9, 2-11
Reset button
description … 1-6
location on switch … 1-2, 1-6
restoring factory default configuration … 4-5
resetting the switch
location of Reset button … 1-6
S
safety and regulatory statements … B-1
safety specifications … A-2
self test
LED behavior during … 2-8
Power LED behavior … 2-9
To Next Page
Loading...
Need help?
General
