Designing the optimal print-production area
Your processing station requires enough space to perform the following tasks:
● Insert the build unit
● Load material
● Unpack
● Service the processing station and replace its components
The height of the processing station is 2000 mm (79 in) when removed from the packaging, and 2420 mm (95
in) when fully installed. The height of the room should be at least 2500 mm (99 in).
When operating, the processing station requires the following amount of space:
Print-production area with external storage tank
Print-production area for cleaning and lling build unit from external storage tanks (4210B only)
26 Chapter 3 Site preparation requirements for the processing station ENWW
To Next Page
Loading...