HP Jet Fusion 4200 - Computer and Network Environment Planning

4 Plan your computer and network environment
You are responsible for ensuring that your computer and network environment fulls the connectivity
requirements for HP Cloud. This chapter provides you an overview on what it implies to connect to HP Cloud and
the procedure you must follow to perform a check before installation.
If you already own an HP 3D printer, your computers, HP 3D Center account, and network may be ready, but HP
recommends reading this chapter anyway. You must also make sure you are running the latest version of HP
SmartStream 3D Command Center in all your machines.
NOTE: Your local network conguration may require that a member of your IT department with the required
administrator permissions performs all the procedures described in this chapter, including the test described at
the end of it as well as the steps on the day of installation. This is to ensure that all instances of the software are
up and running and properly connected to the HP Cloud and to the printer. Make sure they are available on the
agreed date of printer installation. If you require further help, contact your service representative, who can
connect you to a HP network specialist.
There are two important documents that complement this chapter; you can download them from
www.hp.com/go/SmartStream3DCommandCenter/manuals:
● HP Jet Fusion 3D Cloud Connection Security
● HP SmartStream 3D Command Center—Installation and Troubleshooting Guide
Important considerations
Denitions
● Customer Computer means the computer, as further specied in the Site Preparation Guide, provided by
the customer at the customer’s sole expense, which will be hosting the required HP 3D software necessary
to manage the Product(s).
● Customer Machine Data means data collected from the customer’s Product(s) that may include, but is not
limited to the following:
– Product usage data
– Product production data
– Product system events
– Product maintenance and calibration history
– Product model number
– Product serial number
34 Chapter 4 Plan your computer and network environment ENWW