TIP: If you are short of space, consider connecting only one material loading tank at a time, instead of two.
Material loading tanks
Each material loading tank requires 600 × 600 mm (24 × 24 in). The total surface required to store the tanks will
depend on the total number of tanks you have purchased.
Bulk supply
The size of a bulk supply depends on the type of material.
Part number Description Weight Dimensions with pallet
V1R20A HP 3D HR PA 12 1400L/600 kg Material 623 kg (1373 lb) 1143×1143×1500 mm (45×45×59 in)
V1R23A HP 3D HR PA 12 GB 1400L/700 kg Material 723 kg (1594 lb) 1143×1143×1500 mm (45×45×59 in)
V1R24A HP 3D HR PA 11 1700L/750 kg Material 795 kg (1753 lb) 1100×1100×1785 mm (43×43×70 in)
Drum rotator
The space occupied by the drum rotator will depend on the specic brand selected. No specic brand is
recommended.
28 Chapter 3 Site preparation requirements for the processing station ENWW
To Next Page
Loading...