The toner is loose, and it does not stay attached to the printed page.
Cause Solution
the Type Is drop down menu. Click OK to close the Printing
Preferences dialog box, and then click OK again to close
the Printer properties dialog box.
The power strip is not working correctly or the ac power
does not meet the specified requirements.
Plug the product directly into an ac outlet. Ensure that the
power source is clean.
The printer is operating in humidity or temperature
conditions that are not within the recommended ranges.
Move the product to a different location.
The fuser is damaged. Perform a Half self-test functional check on page 107.
If the error persists, replace the fuser.
If, after replacing the fuser, the error persists, replace the
engine power assembly.
Table 6-3 Solving print-quality problems (continued)
ENWW Print-quality troubleshooting 99
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
To Next Page
Loading...
