Tray or bin Paper type Specifications Quantity
Tray 2
1
Paper Range:
60 g/m
2
(16 lb) bond to 220 g/m
2
(59 lb) bond
Maximum stack height: 25 mm (.98 in)
Equivalent to 250 sheets of 75 g/m
2
(20 lb) bond
Transparencies Minimum: 0.102 mm (0.004 in) thick Maximum stack height: 25 mm (.98 in)
Glossy paper Range:
105 g/m
2
(28 lb) bond to 220 g/m
2
(58 lb) bond
Maximum stack height: 25 mm (.98 in)
Tray 3 and optional Trays 4, 5,
and 6
1
Paper Range:
60 g/m
2
(16 lb) bond to 220 g/m
2
(59 lb) bond
Equivalent to 500 sheets of 75 g/m
2
(20 lb) bond
Maximum stack height: 53 mm (2.1 in)
Transparencies Minimum: 0.102 mm (0.004 in) thick Maximum stack height: 53 mm (2.1 in)
Glossy paper Range:
105 g/m
2
(28 lb) bond to 220 g/m
2
(58 lb) bond
Maximum stack height: 53 mm (2.1 in)
Output bin Paper
Up to 300 sheets of 75 g/m
2
(20 lb)
bond
1
Trays 2, 3, 4, 5, and 6 can print on bond paper heavier than 220 g/m
2
(59 lb) in some circumstances, but HP does not
guarantee results.
Paper orientation for loading trays
If you are using paper that requires a specific orientation, load it according to the information in the
following tables.
NOTE: The Alternative Letterhead Mode and Image Rotation settings affect the way you
load letterhead or preprinted paper. The following information depicts the default setting.
ENWW
Load paper trays
85
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...