IPv6: If the IP address begins with "fe80:", the product should be able to print. If not, you must
manually configure the IP address. See
Manually configure IPv6 TCP/IP parameters from the
control panel on page 68.
Install the software
1. Quit all programs on the computer.
2. Install the software from the CD.
3. Follow the onscreen instructions.
4. When prompted, select the Connected via the Network option, and then click the Install
button.
5. From the list of available printers, select the printer that has the correct IP address.
6. Click the Finish button.
7. On the Additional Options screen, you can install more software, or click the Exit button.
8. Print a page from any program to make sure that the software is correctly installed.
NOTE: If the installation failed, reinstall the software.
ENWW
Connect to a network
65
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...