Load tray 1 <TYPE>, <SIZE>. Press [OK] to continue.
Description
The tray is not congured for the paper type and size that the print job is requesting.
Recommended action
Load the correct paper into Tray 1 and press OK to continue printing.
Load tray 1. Plain, <SIZE> / Cleaning mode. Press [OK] to start.
Description
The product is ready to process the cleaning operation.
Recommended action
Load Tray 1 with plain paper in the size indicated, and then press the OK button.
Manual Duplex. Load Tray <#>. Press [OK] to continue.
Description
The rst side of a manual duplex job has printed, and the page needs to be loaded to process the second side.
Recommended action
Load the page in the indicated tray with the side to be printed face up, and the top of the page away
from you, and then press the OK button.
Memory is low. Press [OK] to continue.
Description
The product memory is almost full.
Recommended action
Press the OK button to nish the job, or touch the Cancel button to cancel the job. Break the job into smaller
jobs that contain fewer pages.
NFC cable connection issue. Contact HP service. Press [OK] to continue.
Description
The Near Field Communication (NFC) cable diagnostics did not pass due to a cable issue.
Recommended action
Press OK to continue to use the device, but NFC will not be functional.
Either replace the product or send to HP service.
No dial tone.
Description
The product could not detect a dial tone.
92 Chapter 2 Solve problems ENWW
To Next Page
Loading...