EasyManuals Logo

HP M27fwa User Manual

HP M27fwa
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
EL-MF877-00 Page 2
Template Revision C
Last revalidation date 19-March-2021
HPI instructions for this template are available at EL-MF877-01
Item Description
Notes
Quantity of
items
included in
product
Audio cable*1
Gas Discharge Lamps
0
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0
Components, parts and materials containing
refractory ceramic fibers
0
Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components and
materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Screwdriver
2
Slothead screwdriver
1
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment
including the required steps to remove the external enclosure:
1. Lay the display on soft desk and push the button of stand to unlock the stand, then pull out the stand form the monitor
head.
2. Twist out the screw and separate base and stand.
3. Strip two screws from the rear coverthen move rear cover follow the below way
4. Strip four screws from the hinge.
5. Remove the acetate tapes from the LVDS/ LED cable.
6. Pull out the LVDS/ LED cable to panel.
7. Strip fourteen screws from the rear cover supporter and M/B.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP M27fwa and is the answer not in the manual?

HP M27fwa Specifications

General IconGeneral
Colorblizzard white, silver
Screen Typeled
Tiltableyes
OS Compatibilitywindows
Screen Size27 inches
Panel Typeips
Aspect Ratio16:9
Resolution1920 x 1080
Native Resolution1920 x 1080
Refresh Rate75hz
Horizontal Viewing Angle178 degrees
Vertical Viewing Angle178 degrees
Response Time5 milliseconds
Brightness300 candela per square meter
Contrast Ratio10, 000, 000:1
Pixel Pitch82 pixels per inch
Synchronizationfreesync (amd adaptive sync)
Horizontal Scan Rate86 kilohertz
VGA Ports1
Power Saving Mode0.3 watts
Power Consumption32 watts
Width with Stand24.1 inches
Depth without Stand8 inches
Height without Stand17.7 inches
Net Weight without Stand8.3 pounds

Related product manuals