HP M27fwa User Manual

EL-MF877-00 Page 1
Template Revision C
Last revalidation date 19-March-2021
HPI instructions for this template are available at EL-MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Monitors and DisplaysExternal Options
Marketing Name / Model
[List multiple models if applicable.]
HP M27fwa FHD Monitor
HP M27fwa FHD Monitor-NA
HP M27fwa
HSD-0104-K
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for
the disassembly of HPI products to remove components and materials requiring selective treatment, as defined by EU directive
2012/19/EC, Waste Electrical and Electronic Equipment (WEEE).
NOTE: Recyclers should sort plastic materials into resin streams for recycling based on the ISO 11469 plastic marking code on
the plastic part. For any questions on plastic marking, please contact HP’s Sustainability Contact.
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Notes
Quantity of
items
included in
product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
Display Board*1, Main Board*1
2
Batteries, excluding Li-Ion batteries.
All types including standard alkaline, coin or button
style batteries
0
Li-Ion batteries. Include all Li-Ion batteries if more
than one is provided with the product (such as a
detachable notebook keyboard battery, RTC coin cell,
etc.)
Battery(ies) are attached to the product by (check all
that apply with an “x” inside the “[ ]”):
[ ] screws
[ ] snaps
[ ] adhesive
[ ] other. Explain
NOTE: Add detailed removal procedures including
required tools in the sections 3.1 and 3.2.
0
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps panel*1
1
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
C605 in SPS board
1
External electrical cables and cords
HDMI cable*1, VGA cable*1, Power cord*1,
4

HP M27fwa Specifications

General

Color	blizzard white, silver
Screen Type	led
Tiltable	yes
OS Compatibility	windows
Screen Size	27 inches
Panel Type	ips
Aspect Ratio	16:9
Resolution	1920 x 1080
Native Resolution	1920 x 1080
Refresh Rate	75hz
Horizontal Viewing Angle	178 degrees
Vertical Viewing Angle	178 degrees
Response Time	5 milliseconds
Brightness	300 candela per square meter
Contrast Ratio	10, 000, 000:1
Pixel Pitch	82 pixels per inch
Synchronization	freesync (amd adaptive sync)
Horizontal Scan Rate	86 kilohertz
VGA Ports	1
Power Saving Mode	0.3 watts
Power Consumption	32 watts
Width with Stand	24.1 inches
Depth without Stand	8 inches
Height without Stand	17.7 inches
Net Weight without Stand	8.3 pounds

Summary

Items Requiring Selective Treatment

Printed Circuit Boards (PCB) / Assemblies (PCA)

PCB and PCA with surface > 10 sq cm, including Display Board and Main Board.

Batteries (excluding Li-Ion)

All battery types except Li-Ion, e.g., alkaline, coin, button style.

Li-Ion Batteries

Includes all Li-Ion batteries, attached by screws, snaps, or adhesive.

Mercury-containing Components

Components with mercury, e.g., lamps, backlights, scanner lamps.

Large Liquid Crystal Displays (LCD)

LCD panels > 100 sq cm, with gas discharge lamps.

Electrolytic Capacitors/Condensers

Capacitors/condensers > 2.5 cm in diameter or height.

External Cables and Cords

Includes HDMI, VGA, and power cords.

Tools Required for Disassembly

Screwdriver Types

Standard screwdrivers and slothead screwdrivers are required for disassembly.

Product Disassembly Process

Stand Removal

Instructions for unlocking and removing the display stand from the monitor head.

Rear Cover Removal

Steps to remove screws and detach the rear cover, including internal connections.

Internal Component Connections

Procedures for removing acetate tapes and disconnecting LVDS/LED cables.