Need help?Do you have a question about the HP M24fw and is the answer not in the manual?
General| Color gamut | 99 % |
|---|---|
| Screen shape | Flat |
| Pixel density | 93 ppi |
| Backlight type | Edge LED |
| Display diagonal | 23.8 \ |
| Surface hardness | 3H |
| Anti-glare screen | Yes |
| Display technology | LED |
| Native aspect ratio | 16:9 |
| Vertical scan range | 48 - 75 Hz |
| Maximum refresh rate | 75 Hz |
| Contrast ratio (typical) | 1000:1 |
| Display brightness (typical) | 300 cd/m² |
| Supported graphics resolutions | 1280 x 720 (HD 720), 720 x 400, 1280 x 1024 (SXGA), 1280 x 800, 800 x 600 (SVGA), 1440 x 900, 1024 x 768 (XGA), 1600 x 900, 640 x 480 (VGA), 1680 x 1050 (WSXGA+) |
| HDMI version | 1.4 |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 20 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 14.3 W |
| Operating temperature (T-T) | 5 - 35 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 20 - 80 % |
| Package depth | 121 mm |
| Package width | 610 mm |
| Package height | 399 mm |
| Package weight | 4700 g |
| Tilt angle range | -5 - 25 ° |
| Product color | Silver |
| Market positioning | Business |
| HP segment | Home |
Weight and Dimensions| Depth (with stand) | 177.2 mm |
|---|---|
| Width (with stand) | 535.8 mm |
| Height (with stand) | 396.8 mm |
| Weight (with stand) | 2500 g |
| Depth (without stand) | 34 mm |
| Height (without stand) | 315.6 mm |
Read cautions to minimize risk of personal injury and damage. Proper service methods are important.
Repair must be done by professional technicians. Follow safety guidelines, use proper tools, and handle ESD sensitive components.
Specifies compliance with EU directive for hazardous substances in electrical and electronic equipment.
Manual contains general information with two levels of service: cosmetic/alignment and circuit board/parts replacement.
Information on where to find firmware updates for the monitor.
Procedures for final checks before returning the repaired product to the customer.
Overview of monitor features such as screen size, resolution, display technology, inputs, and software.
Identifies and describes components on the front of the monitor.
Identifies and describes components on the rear of the monitor.
Instructions on how to find the serial and product numbers for support.
Information on preparing the work area and gathering necessary tools before disassembling the monitor.
Steps to prepare for and remove the rear cover of the monitor.
Procedures for repairing VGA and HDMI connectors on the main board.
Confirmation that all monitor functions are working correctly after repair.
Table of common problems, their possible causes, and recommended solutions.
To Next Page
