HP M34D User Manual

2. Connect a video cable.
NOTE: Except for USB Type-C input, the monitor automatically determines which inputs have valid
video signals. You must manually select USB Type-C input. To select any input, including USB Type-C,
open the OSD menu and select Input.
● Connect one end of a DisplayPort cable to the DisplayPort connector on the rear of the monitor and
the other end to the DisplayPort connector on the source device.
● Connect one end of an HDMI cable to the HDMI port on the rear of the monitor and the other end to
the HDMI port on the source device.
● Connect one end of a USB Type-C cable to the USB Type-C port on the rear of the monitor and the
other end to the USB Type-C port on the source device.
10
Chapter 1 Getting started

HP M34D Specifications

General

Color	black
Screen Type	led
Tiltable	yes
Wall Mount	100mm x 100mm
Touch Screen	no
Webcam	no
OS Compatibility	chrome, mac, windows
Screen Size	34 inches
Panel Type	va
Aspect Ratio	21:9
Resolution	3440 x 1440
Native Resolution	3440 x 1440
Refresh Rate	100hz
Horizontal Viewing Angle	178 degrees
Vertical Viewing Angle	178 degrees
Response Time	5 milliseconds
Brightness	250 candela per square meter
Contrast Ratio	3500:1
Synchronization	not applicable
Horizontal Scan Rate	160 kilohertz
HDR	no
Built-In Speakers	yes
HDMI Ports	1
USB Type B Ports	0
Display Port Inputs	1
Mini Display Port	0
VGA Ports	0
DVI	0
Thunderbolt Ports	0
Headphones Output	yes
Voice Assistant	no
Depth with Stand	9.25 inches
Height with Stand	20.4 inches
Width with Stand	31.89 inches
Height without Stand	14.44 inches
Net Weight without Stand	23.17 pounds