To Next Page

To Previous Page

Table 2-2 Button names and descriptions

Button Description

(1) Brightness button Opens the Brightness adjustment scale.

(2) Color button Opens the Color menu and allows you to adjust the monitor screen.

(3) Next Active Input button Switches the monitor’s input source to the next active input.

(4) Menu button Opens the OSD main menu, selects a menu item from the OSD, or closes the OSD menu.

Reassigning the function buttons

Except for the Menu button, you can change the action associated with a function button from the default

action that you can quickly access your most commonly used menu items.

To reassign the function buttons:

1. Press the Menu button to open the OSD menu.

2. Select Menu, select Assign Buttons, and then select one of the available options for the button that you

want to assign.

Changing the Power Mode setting (select products only)

This section describes how to activate Performance mode. Certain features on your monitor might require

Performance mode to be active.

When in sleep mode, to comply with international power standards, the monitor default setting is Power

Saver mode.

If your monitor supports Performance mode, then to keep the USB ports enabled when the monitor is in

Auto-Sleep Mode, change the Power Mode setting from Power Saver to Performance.

NOTE: If you are connecting a computer that is not battery powered, the Power Mode setting must be

changed to Performance mode.

To change the power mode setting:

1. Press the Menu button to open the OSD menu.

2. Select Power, select Power Mode, and then select Performance.

3. Select Back and close the OSD.

Reassigning the function buttons

Other manuals for HP M34D

Questions and Answers:

Need help?

Do you have a question about the HP M34D and is the answer not in the manual?

General