To Next Page

To Previous Page

Remove the display assembly:

1. Close the computer.

2. Turn the computer upside down, with the front toward you.

3. Release the WLAN antenna cables (1) from the clips (2) built into the base enclosure.

4. Turn the computer right-side up, with the front toward you.

5. Open the computer as far as possible.

6. Disconnect the display panel cable (1) from the system board.

Component replacement procedures

Download from Www.Somanuals.com. All Manuals Search And Download.

Questions and Answers:

Need help?

Do you have a question about the HP Mini 110 and is the answer not in the manual?

HP Mini 110 Specifications

General

Graphics	Intel GMA 950
Wireless	802.11b/g
RAM	1GB
Storage	160GB HDD
Display	10.1 inch
Resolution	1024 x 600
Weight	1.06 kg (2.34 lbs) with 3-cell battery
Ports	3 x USB 2.0, 1 x VGA, 1 x Headphone/Microphone combo