• ESD: IEC 61000-4-2
• Radiated: IEC 61000-4-3
• EFT/Burst: IEC 61000-4-4
• Surge: IEC 61000-4-5
• Conducted: IEC 61000-4-6
• Power frequency magnetic field: IEC 61000-4-8
• Voltage dips and interruptions: IEC 61000-4-11
• Harmonics: EN 61000-3-2, IEC 61000-3-2
• Flicker: EN 61000-3-3, IEC 61000-3-3
Ethernet
• Four RJ-45 auto-sensing 10/100/1000 (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type
100Base-TX, IEEE 802.3ab Type 1000Base-T); Duplex: 10Base-T/100Base-TX: half or full;
1000Base-T: full only.
• Two dual-personality ports: each port can be used as either an RJ-45 10/100/1000 port
(IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T
Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers)
• IEEE 802.3ad Link Aggregation Protocol (LACP) supported on all ports
Cabling and safety standards
Laser safety information
SFP ("mini-GBIC") LasersEN/IEC standard
compliance
Compatible with these IEEE
standards
Technology
not applicablenot applicable
IEEE 802.3 10BASE-T10-T
IEEE 802.3u 100BASE-TX100-TX
IEEE 802.3ab 1000BASE-T1000-T
Class 1 Laser ProductEN/IEC 60825IEEE 802.3u 100BASE-FX100-FX
Laser Klasse 1
Class 1 Laser ProductEN/IEC 60825IEEE 802.3ah 100BASE-BX10100-BX
Laser Klasse 1
Class 1 Laser ProductEN/IEC 60825IEEE 802.3z 1000BASE-SX1000-SX
Laser Klasse 1
Class 1 Laser ProductEN/IEC 60825IEEE 802.3z 1000BASE-LX1000-LX
Laser Klasse 1
Class 1 Laser ProductEN/IEC 60825IEEE 802.3ah
1000BASE-BX10
1000-BX
Laser Klasse 1
Ethernet 25