ARNING!
To avoid injury, do not touch bare wires, terminals, or parts with high-voltage hazard signs.
IMPORTANT:
The barcode on the router chassis contains product information that must be provided to local sales
agent when you return a faulty router for repair.
Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to open
the chassis, contact HP for permission. Otherwise, HP shall not be liable for any consequence.
Installation prerequisites
You have read "Preparing for installation" carefully.
All requirements in "Preparing for installation" are met.
Installation flowchart
The following installation options are available for the router:
Workbench mounting.
Wall mounting.
Rack mounting.
Determine the installation method according to the installation environment. Follow the installation
flowchart shown in Figure 3 to install the router.
To Next Page
Loading...
