23
Observing the startup process
The router first initializes its memory at startup. Then it runs the extended BootWare. Observe the
information displayed on the configuration terminal:
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing....Done.
****************************************************************************
* *
* HP 95X BootWare, Version 1.43 *
* *
****************************************************************************
Copyright (c) 2010-2015 Hewlett-Packard Development Company, L.P.
Compiled Date : Jun 17 2014
CPU ID : 0x1
Memory Type : DDR3 SDRAM
Memory Size : 1024MB
Flash Size : 2MB
Nand Flash size : 256MB
CPLD Version : 2.0
PCB Version : 3.0
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Loading the main image files...
Loading file flash:/msr954-cmw710-system-r0106.bin...........................
.......................Done.
Loading file flash:/msr954-cmw710-security-r0106.bin...Done.
Loading file flash:/msr954-cmw710-voice-r0106.bin.....Done.
Loading file flash:/msr954-cmw710-data-r0106.bin.....Done.
Loading file flash:/msr954-cmw710-boot-r0106.bin.........Done.
Image file flash:/msr954-cmw710-boot-r0106.bin is self-decompressing.........Done.
System image is starting...
Line aux0 is available.
Press ENTER to get started.
Press Enter and the system displays the following prompt:
<Sysname>
This prompt indicates that the router has entered user view and is ready to configure.
To Next Page
Loading...
Need help?
General
