24
Power-on check
After powering on the router, check the following items:
The LEDs on the front panel are normal, as described in "LED description."
The configuration terminal displays information correctly. You can see the startup window on the
local configuration terminal. For more information, see "Observing the startup process."
After completing the POST, the system prompts you to press Enter. When the command line
prompt appears, the router is ready to configure.
Configuring basic settings for the router
After the router is powered on for the first time, configure basic settings for the router. For more
information, see HP MSR Router Series Configuration Guides(V7) and HP MSR Router Series
Command References(V7).
To Next Page
Loading...
Need help?
General
