HP MSR954 Series User Manual

3
Preparing for installation
The HP MSR954 Router Series includes the models in Table 1.
Table 1 HP MSR954 Router Series models
Product code HP description RMN
JH296A
HP MSR95X 1GbE+SFP Router
BJNGA-BB0036
JH297A
HP MSR95X-W 1GbE+SFP (WW) Router
BJNGA-BB0037
JH298A
HP MSR95X-W 1GbE+SFP LTE (AM) Router
BJNGA-BB0038
JH299A
HP MSR95X-W 1GbE+SFP LTE (WW) Router
BJNGA-BB0039
IMPORTANT:
For regulatory identification purposes, every MSR954 router is assigned a regulatory model number
(RMN). These regulatory model numbers should not be confused with the marketing name HP MSR954
or the product code.
Safety recommendations
To avoid any equipment damage or bodily injury, read the following safety recommendations before
installation. Note that the recommendations do not cover every possible hazardous condition.
Safety symbols
When reading this document, note the following symbols:
WARNING means an alert that calls attention to important information that if not understood or
followed can result in personal injury.
CAUTION means an alert that calls attention to important information that if not understood or
followed can result in data loss, data corruption, or damage to hardware or software.
General safety recommendations
 Keep the router and installation tools away from walk areas.
 Place the router in a dry and flat location and make sure anti-slip measures are in place.
 Remove all external interface cables and power cords before moving the router.

HP MSR954 Series Specifications

General

Brand	HP
Model	MSR954 Series
Category	Network Router
Language	English