cover to access the pick assembly inside the automatic document feeder, clean the rollers
or separator pad, and then close the cover.
To clean the rollers or separator pad
1. Remove all originals from the document feeder tray.
2. Lift the automatic document feeder cover (1).
This provides easy access to the rollers (2) and separator pad (3).
1 Automatic document feeder cover
2 Rollers
3 Separator pad
3. Lightly dampen a clean lint-free cloth with distilled water, then squeeze any excess
liquid from the cloth.
4. Use the damp cloth to wipe any residue off the rollers or separator pad.
NOTE: If the residue does not come off using distilled water, try using isopropyl
(rubbing) alcohol.
5. Close the cover of the automatic document feeder.
Update the printer
HP is always working to improve the performance of its printers and bring you the latest
features. If the printer is connected to a network and Web Services has been enabled,
you can check for and install printer updates.
To update the printer, use one of the following methods:
•
Update the printer using the embedded web server
•
Update the printer using the printer control panel
Update the printer 33
To Next Page
Loading...