HP OMEN 25i FHD Gaming

A Technical specications
This section contains technical specications for the physical aspects of your monitor, such as the weight and
viewing dimensions, as well as required environmental operating conditions and power source ranges.
All specications represent the typical specications provided by HP component manufacturers; actual
performance can vary either higher or lower.
NOTE: For the latest specications or additional specications for this product, go to http://www.hp.com/
go/quickspecs/ and search for your specic monitor model to nd the model-specic QuickSpecs.
62.22 cm (24.5 in) model specications
This section provides specications for your monitor.
Table A-1 Technical specications
Specication Measurement
Display, wide-screen 62.22 cm 24.5 in
Type IPS
Viewable image size 62.22 cm diagonal 24.5 in diagonal
Maximum weight (unpacked) 5.30 kg 11.69 lbs
Dimensions (include base)
Height 38.94 cm 15.33 in
Depth 23.31 cm 9.18 in
Width 55.75 cm 21.95 in
Tilt –5° to 20°
Environmental requirements temperature
Operating temperature 5°C to 35°C 41°F to 95°F
Storage temperature –40°C to 65°C –40°F to 149°F
Storage humidity 5% to 95% (noncondensing)
Power source 100 V ac to 240 V ac 50/60 Hz
Video input terminal One HDMI port and one DisplayPort connector
Preset display resolutions
The following display resolutions are the most commonly used modes and are set as factory defaults. The
monitor automatically recognizes these preset modes, and they will appear properly sized and centered on
the screen.
23