HP OMEN 27u - HP Watermark and Image Retention Policy

2. Connect a video cable.
● Connect one end of a DisplayPort cable to the DisplayPort connector on the rear of the monitor and
the other end to the DisplayPort connector on the source device.
● Connect one end of an HDMI cable to the HDMI port on the rear of the monitor and the other end to
the HDMI port on the source device.
NOTE: HDMI 2.0 and 2.1 ports must use the correct HDMI cable for each version.
● Connect one end of a USB Type-C cable to the USB Type-C port on the rear of the monitor and the
other end to the USB Type-A port on the source device. (Use only the HP-approved USB Type-C to
USB Type-A cable provided with the monitor.)
10
Chapter 1 Getting started