NOTE: You must connect a USB Type-C to Type-A cable from the source device (computer, laptop,
gaming console) to the rear of the monitor to enable the USB Type-A ports on the monitor. For more
information, see Connecting USB devices (select products only) on page 12.
3. Connect one end of the power cord to the AC adapter (1) and the other end to a grounded AC outlet (2).
Then connect the AC adapter to the power connector on the monitor (3).
WARNING! To reduce the risk of electric shock or damage to the equipment:
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
Plug the power cord into a grounded (earthed) AC outlet that is easily accessible at all times.
Disconnect power from the equipment by unplugging the power cord from the AC outlet.
For your safety, do not place anything on power cords or cables. Arrange them so that no one can
accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging the power cord
from the AC outlet, grasp the cord by the plug.
Connecting the cables 11
To Next Page
Loading...
