HP OMEN - Using the Monitor; Downloading the Monitor Driver; Using the OSD Menu

2 Using the monitor
Downloading the monitor driver
You can download and install the monitor INF (Information) driver le from http://www.hp.com/support.
1. Go to http://www.hp.com/support.
2. Select Software and Drivers.
3. Select your product type.
4. Enter your HP monitor model in the search eld and follow the on-screen instructions.
This monitor is Plug and Play–compatible, and the monitor will work correctly without installing the INF le.
Monitor Plug and Play compatibility requires that the computer’s graphics card is VESA DDC2–compliant and
that the monitor connects directly to the graphics card. Plug and Play does not work through separate BNC-
type connectors or through distribution buers or boxes.
Using the OSD menu
Use the OSD menu to adjust the monitor screen image based on your viewing preferences. You can access and
make adjustments in the OSD menu using the OSD joystick on the monitor's rear panel.
To access the OSD menu and make adjustments:
1. If the monitor is not already on, press the power button to turn on the monitor.
2. To access the OSD menu, press the center of the OSD joystick on the rear panel.
3. Move the joystick up, down, left, or right to navigate menu choices. Press the center of the joystick to
make a selection.
The following table lists possible menu selections in the OSD main menu.
Table
2-1 OSD main menu options and their descriptions
Main menu Description
Gaming Select to adjust gaming preferences, such as Adaptive-Sync/FreeSync (on or o), response time,
frame rate, message timers, crosshair, external lighting, and multiple monitor align.
Image Adjusts the screen image, including brightness, contrast, dynamic contrast, gamma, sharpness, and
image scaling.
Color Provides a variety of color presets that congure the monitor for dierent viewing situations.
Input Selects the video input signal (DisplayPort or HDMI).
Power Adjusts the power settings.
Menu Adjusts the OSD menu controls and lists language preference selections.
Management Returns all OSD menu settings to the factory default settings.
Information Displays important information about the monitor.
Exit Exits the OSD menu screen.
14 Chapter 2 Using the monitor