Operating the OmniBook XE2
Managing Battery Power
2-13
allowed in the OmniBook. If you have repartitioned the hard disk, purchased a
new hard disk, or would like to make the partition smaller, follow the
instructions below.
CAUTION
This procedure erases the hard disk. Be sure to save any data on your
hard disk before starting this procedure.
You’ll need the OmniBook, its CD-ROM drive, and the OmniBook Recovery
CD to create a hibernate partition.
1. Connect the ac adapter to the OmniBook.
2. Insert the bootable Recovery CD in the CD-ROM drive.
3. Reboot, press ESC twice and select the ATAPI CD-ROM as the boot
device.
4. When prompted, click “2 Continue”
5. Click “2 Advanced”. Choose the desired hibernation partition size.
6. Select Do not load operating system.
7. Click “1 Continue”.
8. Click OK.
Do not interrupt the Hibernate partition process or unplug the ac
adapter until the process is complete.
To Next Page
Loading...
