HP OmniBook XE2 - Installing Cards; To Install a 3 Com 3 C589 D Etherlink III PC Card; To Install a 3 Com 3 C575 Fast Etherlink XL Cardbus PC Card4-12

Using Windows 98
Installing Cards
5-12
Installing Cards
This section describes how to install the following:
♦ 3Com 3C589D EtherLink III PC Card.
♦ 3Com 3C575 Fast EtherLink XL CardBus PC Card.
To install a 3Com 3C589D EtherLink III PC Card
Requirements
♦ OmniBook XE2 with Windows 98 installed.
♦ 3Com 3C589D EtherLink III PC Card.
1. While Windows 98 is running, insert the PC Card.
2. Click Next at the Add New Hardware Wizard.
3. Click Next to Search for the best driver for your Device (Recommended).
4. Click Next.
5. Click Next to accept the driver.
6. Click Finish.
7. Click Yes to restart the computer.
To install a 3Com 3C575 Fast EtherLink XL
CardBus PC Card
Requirements
♦ OmniBook XE2 with Windows 98 installed.
♦ 3Com 3C575 Fast EtherLink XL CardBus PC Card.
1. While Windows 98 is running, insert the PC Card.
2. Click Next at the Add New Hardware Wizard.
3. Click Next to Search for the best driver for your Device (Recommended).
4. Click Next.
5. Click Next to accept the driver.
6. Click Finish.
7. Click Yes to restart the computer.
5