8-2
Features and Support Information
Your OmniBook is designed to provide trouble-free operation. The following
suggestions can help you maintain its dependability:
• Observe the temperature limits and other specifications listed in the next
section.
• If you think your OmniBook might need repair service, see the warranty
and service information in the Support and Service booklet.
To contact Hewlett-Packard
If you have questions that this manual and the online OmniBook manuals don’t
answer (even after looking in the contents and index), you can contact
Hewlett-Packard at the address or phone number listed in the Support and
Service booklet or in OmniBook Support in the online OmniBook Library.
Please have your OmniBook with you.
To clean the OmniBook
You can clean the OmniBook with a soft cloth dampened either in clean water
or in water containing a mild detergent. Do not use an excessively wet cloth nor
allow water inside the case. Do not use any abrasive cleaners, especially on the
display. Do not apply any cleaner directly to the display. Instead, apply the
cleaner to a soft cloth and then gently wipe the display. You can clean the
keyboard with a vacuum cleaner to remove accumulated dust.
This chapter includes:
♦ OmniBook XE2 Features
♦ OmniBook Accessories
♦ Getting Assistance and support
♦ Removing OmniBook Passwords
♦ Using Electronic Serial Numbers
To Next Page
Loading...
