Page 3
EL-MF877-00
Template Revision C
Last revalidation date 20-Dec-2018
HPI instructions for this template are available at EL-MF877-01
26. Remove the PSU from chassis
27. Remove the screws covered
28. Remove PSU cover
29. Use PH1 screw driver to remove FG screw
30. Disconnect fan connector and inlet connector
31. Loose screws and remove PCB from case
32. Loose screws and remove PSU fan
33. Use QUICK 310 to remove Ele-Cap from PCBA
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
Step1 Use T-15 screw driver to Loose thumb screw and
remove access panel.
Step2 Disconnect ODD power cable and ODD SATA cable
from ODD.
Step3 Press the ODD’s latch on ODD cage
Step4
Remove the ODD from ODD cage
To Next Page
Loading...
