V400/V800 Storage System Specifications
The HP 3PAR V400 and V800 Storage Systems accommodate a maximum of up to four or eight
controller nodes, respectively. The maximum number of supported drive chassis varies according
to the number of controller nodes utilized by the system, the number and type of Fibre Channel
adapters that are installed.
Physical Specifications
The following table lists system specifications for the HP P10000 3PAR Storage Systems. These
specifications are subject to change without notice.
Table 3 V400/V800 Storage System Physical Specifications
V400/V800 Storage System Physical Specifications
2-Meter Cabinet
60 x 194.3 x 91.3 cm23.6 x 76.5 x 36 in.Dimensions (width x height x depth)
36 in. (91.44 cm) front and 30 in.
(76.2 cm) back
Service Clearance
195.5 kg439 lbs.Weight (not populated)
852.8 kg1,880 lbs.Maximum Weight (fully populated)
213.2 kg470 lbs.Maximum Weight per leveling foot
10.5 kg/sq. cm149.6 lbs/sq. in.Maximum Load per leveling Foot
Component Weights
296.7 kg654.1 lbs.V400 Base Configuration
338.9 kg747.1 lbs.V800 Base Configuration
22.5 kg49.6 lbs.2 Controller Nodes (fully populated)
81.6 kg180 lbs.Drive Chassis (fully populated)
6.0 kg13.3 lbs.Service Processor
Capacity Specifications
The following table lists system capacity and configuration details for the HP P10000 3PAR Storage
Systems.
Table 4 V400/V800 Storage System Capacity Specifications
V800V400Feature
2, 4, 6, or 82 or 4Number of controller nodes
64 GB with 2 nodes 128 GB with 4
nodes 192 GB with 6 nodes 256 GB
with 8 nodes
32/64 GB with 2 nodes 64/128 GB
with 4 nodes
Control Cache
128 GB with 2 nodes 256 GB with 4
nodes 384 GB with 6 nodes 512 GB
with 8 nodes
64/128 GB with 2 nodes 128/256
GB with 4 nodes
Data Cache
0-48 0-96 0-144 0-1920-48 0-96Host Ports
4-48 4-96 4-1924-48 4-96Host Ports GZ number
8-24 with 2 nodes 16-48 with 4 nodes
32-96 with 8 nodes
8-24 with 2 nodes 16-48 with 4 nodesFC Disk Ports
10 System Components and Specifications
To Next Page
Loading...
Need help?
General