40 Event descriptions
257
Info. The indicated snapshot has been prepared and committed and is ready for use.
Recommended actions
• No action is required.
258
Info. The indicated snapshot has been committed and is ready for use.
Recommended actions
• No action is required.
259
Info. In-band CAPI commands have been disabled.
Recommended actions
• No action is required.
260
Info. In-band CAPI commands have been enabled.
Recommended actions
• No action is required.
261
Info. In-band SES commands have been disabled.
Recommended actions
• No action is required.
262
Info. In-band SES commands have been enabled.
Recommended actions
• No action is required.
263
Warning The indicated disk spare is missing. Either it was removed or it is not responding.
Recommended actions
• Replace the indicated disk.
264
Info. The link speed of the port bypass circuit and interconnect mode has been set to the default.
Recommended actions
• No action is required.
265
Info. Port bypass circuits currently use the service port, which may limit the link speed or interconnect mode
support.
Recommended actions
• No action is required.
To Next Page
Loading...
