EasyManuals Logo
Home>HP>Storage>P2000 G3 MSA

HP P2000 G3 MSA User Manual

HP P2000 G3 MSA
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
HP P2000 G3 MSA System Event Descriptions Reference Guide 9
Event descriptions
Introduction
This guide is for reference by storage administrators to help troubleshoot storage-system issues. It describes
event messages that may be reported during system operation and specifies any actions recommended in
response to an event.
Events and event messages
When an event occurs in a storage system, an event message is recorded in the system’s event log and,
depending on the system’s event notification settings, may also be sent to users (using email) and
host-based applications (via SNMP or SMI-S).
Each event has a numeric code that identifies the type of event that occurred, and has one of the following
severities:
Critical: A failure occurred that may cause a controller to shut down. Correct the problem immediately.
Error: A failure occurred that may affect data integrity or system stability. Correct the problem as soon
as possible.
Warning: A problem occurred that may affect system stability but not data integrity. Evaluate the
problem and correct it if necessary.
Informational: A configuration or state change occurred, or a problem occurred that the system
corrected. No immediate action is required. In this guide, this severity is abbreviated as “Info.
An event message may specify an associated error code or reason code. Error codes and reason codes
are outside the scope of this guide.
Event format in this guide
This guide lists events by event code and severity, where the most severe form of an event is described first.
Events are listed in the following format. Events that do not apply to P2000 G3 MSA System products are
not listed.
Resources for diagnosing and resolving problems
For further information about diagnosing and resolving problems, see:
The troubleshooting chapter and the LED descriptions appendix in your product’s User Guide
The topic about verifying component failure in the component’s replacement instructions document
These and other HP documents can be found
on the Software Support/Documentation DVD shipped with
your product or at http://www.hp.com
/go/p2000/manuals. For links to additional information about your
product, see
http://www.hp.com/go/p2000 or http://www.hp.com/go/msa. For product support and to
download drivers, firmware, and software, see
http://www.hp.com/support.
For a summary of storage events and corresponding SMI-S indications, see Events sent as indications to
SMI-S clients on page 62.
Event code
Severity
Event description.
Recommended actions
If the event indicates a problem, actions to take to resolve the problem.

Other manuals for HP P2000 G3 MSA

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP P2000 G3 MSA and is the answer not in the manual?

HP P2000 G3 MSA Specifications

General IconGeneral
BrandHP
ModelP2000 G3 MSA
CategoryStorage
LanguageEnglish

Related product manuals