To access and make adjustments in the OSD:
● Use the buttons at the bottom of the monitor’s front bezel.
- or -
● Use the OSD controller on the monitor’s rear panel.
To access the OSD menu and make adjustments:
1. If the monitor is not already on, press the power button to turn on the monitor.
2. Press the Menu button or, if you are using the OSD controller, press the center of the OSD controller.
3. Use the three function buttons to navigate, select, and adjust the menu choices. The on-screen button
labels vary, depending on which menu or submenu is active.
-or-
Move the controller up, down, left, or right to navigate menu choices. Press the center of the controller to
make a selection.
The following table lists possible menu selections in the OSD main menu. It includes descriptions for each
setting and its impacts on your monitor's appearance or performance.
Table 2-1 OSD menu options and descriptions for using a button or a controller (select products only)
Main menu Description
Brightness+ Adjusts the brightness and more.
Color Selects and adjusts the screen color.
Image Adjusts the screen image.
Input Selects the video input signal.
USB Host Adjusts the USB Hosts settings.
Power Adjusts the power settings.
Audio Adjusts the audio settings.
Menu Adjusts the OSD menu and function button controls.
Management Adjusts the DDC/CI settings and returns all OSD menu settings to the factory default settings..
Information Selects and displays important information about the monitor,
Exit Exits the OSD menu screen.
Using the function buttons
The function buttons oer useful actions, and you can customize all but one of them to make them even more
useful.
NOTE: The actions of the function buttons vary among monitor models.
16
Chapter 2 Using the monitor
To Next Page
Loading...
Need help?
General
