Troubleshooting and Maintenance 45
Wireless keyboard or
mouse does not work or
is not detected.
(continued)
B Resynchronize the keyboard and mouse to the
receiver:
The receiver, wireless keyboard, and wireless mouse
shown in the illustrations are examples; your models may
vary.
IMPORTANT: During these steps, place the wireless
keyboard and wireless mouse on the same level as the
receiver, within 30 cm (12 inches) of the receiver, and
away from interference from other devices.
1 Unplug and reconnect the receiver into a USB connector
on the computer. Your computer model may have a
connector dedicated to the receiver. If you have a choice,
use a USB connector on the front of the computer.
2 The receiver may have an LED light or a Connect button,
which is also an LED light. Skip this step if your receiver
has no Connect button (A).
Push the Connect
button (A) on the
receiver (which is also the
LED light), and hold it for
5 to 10 seconds until the
light starts to flash.
Wireless keyboard and mouse (continued)
Symptom Possible solution
To Next Page
Loading...
Need help?
General