HP Pavilion DV5000 User Manual

Setup Utility defaults
To return all settings in the Setup Utility to the values that were set at the factory:
1. Open the Setup Utility by turning on or restarting the computer, and then pressing f10 while the
“Press <F10> to enter setup” message is displayed in the lower-left corner of the screen.
2. To reset the Setup Utility factory defaults:
●
Press f9.
– or –
●
Use the arrow keys to select Exit > Load Setup Defaults, and then press enter.
3. When the Setup Confirmation dialog box is displayed, press enter.
4. To save your preferences and exit the Setup Utility:
●
Use the arrow keys to select Exit > Exit Saving Changes, press enter, and then follow the
instructions on the screen.
– or –
●
Press f10, and then follow the instructions on the screen.
Your preferences go into effect when the computer restarts.
NOTE Your password, security, and language settings are not changed when you restore
the factory default settings.
ENWW Setup Utility defaults 145

HP Pavilion DV5000 Specifications

General

CPU	Intel Pentium M or Intel Celeron M
Chipset	Intel 915GM
Memory	Up to 2 GB DDR2
Graphics	Intel Graphics Media Accelerator 900
Display	15.4-inch WXGA
Hard Drive	40 GB to 100 GB
Optical Drive	DVD\u00b1RW
Wireless	802.11b/g
Operating System	Windows XP Home or Windows XP Professional
Battery Life	Up to 3 hours
Ports	3 USB 2.0, VGA, S-Video, Ethernet, Modem, Headphone, Microphone, ExpressCard/54